SN74CBTLVR16292LR
| Parameters | |
|---|---|
| Family | CBTLV/3B |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 0.25 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.79mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLVR |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 56 |
| JESD-30 Code | R-PDSO-G56 |
| Number of Outputs | 2 |
| Qualification Status | COMMERCIAL |
| Circuit | 12 x 1:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
SN74CBTLVR16292LR Overview
In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Multiplexer/Demultiplexer as the analog IC.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.Multiplexers of the 74CBTLVR series can be used in a wide range of applications.This configuration includes 56 terminations as part of its basic functionality.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch contains 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In the CBTLV/3B family, the logic switch is included.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.As a result, the turn signal switch consists of 2 outputs.The multiplexer is equipped with 1 inputs.
SN74CBTLVR16292LR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
SN74CBTLVR16292LR Applications
There are a lot of Rochester Electronics, LLC SN74CBTLVR16292LR Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Frequency multiplexing system
- Analog to digital conversion
- Recording transmission
- Electronically controlled engine system
- LVDS
- Data bus control
- A/D converters
- Time division multiplexing system
- Data transfer