SN74CBTLV3861PWG4
| Parameters | |
|---|---|
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 40Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
SN74CBTLV3861PWG4 Overview
Due to the lack of space on the board, digital switch is provided in the TSSOP.There is a design for terminating 24 as part of its basic configuration.The multiplexer's system is supplied with a voltage of 2.5V.Signal switch has 24 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.Currently, it is configured with a 24 pin configuration.Surface Mount is the way it is mounted.The logic switch object belongs to the family of CBTLV/3B.Signal multiplexer contains 10 bits.mux switch's normal operation requires the power supply of 2.5/3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 10μA current of multiplexer ic without external influences.The signal switching operates with a resistance of 2.As far as the resistance is concerned, it operates with 40Ohm.The maximum temperature for this signal switch is 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Typical device specifications specify a voltage supply of 2.3V for the digital swith.In terms of logic ICs, it uses BUS DRIVER.
SN74CBTLV3861PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
SN74CBTLV3861PWG4 Applications
There are a lot of Texas Instruments SN74CBTLV3861PWG4 Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Speed control of medern motors
- Video transmission
- Memory chips
- HDMI applications
- Logic gates for other digital devices
- Night vision cameras
- Textile mills
- PCIe
- Metal detectors