SN74CBTLV16292DLR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 11Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV16292 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Circuit | 12 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.1 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 24 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV16292DLR Overview
Digital switch is provided in the 56-BSSOP (0.295, 7.50mm Width) for the purpose of saving board space.The package is packaged in accordance with Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.There are 56 terminations included in its basic configuration.As its base part number is 74CBTLV16292, logic switch can also be used to find its related parts.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has a total of 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.A configuration of 56 pins is used.The mounting point is Surface Mount.In the CBTLV/3B family, the logic switch is included.As a result, signal multiplexer provides a total of 12 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.Keeping Vsup at 3.6V will prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 2.5/3.3V.There are 2 outputs designed for the operation of the turn signal switch.In electronic terms, the digital switch ic is classified as Other Logic ICs.Without the influence of external factors, it consumes 10μA current of multiplexer ic.It has 24 inputs.According to TR, the switches is packaged.A resistance of 11Ohm is used to operate it.
SN74CBTLV16292DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CBTLV16292DLR Applications
There are a lot of Texas Instruments SN74CBTLV16292DLR Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- Relay
- Microprocessor instruction decoding
- Logic gates for other digital devices
- PCIe
- Implementing boolean functions with multiple variables
- To select different devices in microprocessor output
- Audio transmission
- Data transfer
- Robotic vehicles