SN74CBTK6800DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTK6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 20μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTK6800DWR Overview
Due to the fact that it is provided in the 24-SOIC (0.295, 7.50mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBTK series.Among its basic features are 24 terminations.To find signal switch's related components, a base part number of 74CBTK6800 may also be used.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has a total of 24 component pins.As a result, conductors end at GULL WING.This supply type employs Single.This multiplexer ic has 24 pins configured.As you can see, it is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer consists of 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.There is a power supply provided for the mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 20μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.With a resistance of 0, it operates.With a resistance of 20Ohm, it operates.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTK6800DWR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTK6800DWR Applications
There are a lot of Texas Instruments SN74CBTK6800DWR Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Time division multiplexing system
- Analog to digital conversion
- High-performance memory systems
- Medical industry
- Signal router
- Injectors
- Night vision cameras
- Analog, digital or video signal switching
- Recording transmission