SN74CBTD3306PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Length | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTD3306PWE4 Overview
This is a relatively small item of digital switch that is included in the TSSOP in order to save space on the board.The package is in the form of Rail/Tube.As part of its basic configuration, 8 terminations are designed as a part of it.The multiplexer is supplied with 5V voltage.A component pin count of 8 is found on this turn signal switch.GULL WING represents the end of conductors.Single is used as its supply type.The board is configured with 8 pins.The mounting is in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer contains 1 bits.There is a power supply provided for the mux switch's normal operation of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The resistance is 2.A resistance of 7Ohm is used to operate it.This turn signal switch's circuit uses 2 transmission channels.In this case, operating this signal switch at 85°C is acceptable.Temperatures of the multiplexer should be kept at -40°C.The signal switches is specified to operate at the maximum supply voltage of 5.5V in compliance with the applicable device specification.A minimum supply voltage of 4.5V is required to operate the digital swith.It also provides improved characteristics of BUS SWITCH.It uses the logic IC BUS DRIVER as its core logic unit.
SN74CBTD3306PWE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
BUS DRIVER as the logic IC
SN74CBTD3306PWE4 Applications
There are a lot of Texas Instruments SN74CBTD3306PWE4 Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Microprocessor instruction decoding
- Analog, digital or video signal switching
- Enabling different rows of memory depending on address in memory chips
- Automation system
- Control unit of Central Processing unit (CPU)
- Data bus control
- Data collection system
- Transmission from the computer system of a satellite
- Code conversion