SN74CBT3245ADGVR
| Parameters | |
|---|---|
| Propagation Delay | 6.4 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT3245 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
SN74CBT3245ADGVR Overview
Due to the fact that it is provided in the 20-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 20 terminations.In addition, it also has a base part number of 74CBT3245, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides a total of 8 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.There are no external influences on this multiplexer ic, so it consumes 50μA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches package is packaged in accordance with the TR method.As far as the resistance is concerned, it operates with 2.With a resistance of 7Ohm, it operates.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT3245ADGVR Features
Supplied in the 20-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3245ADGVR Applications
There are a lot of Texas Instruments SN74CBT3245ADGVR Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Audio transmission
- Data bus control
- Steel plants
- Night vision cameras
- LVDS
- Telephone network
- Implementing boolean functions with multiple variables
- Electronically controlled engine system
- Speed control of medern motors