SN74CBT3125CDGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 41.787197mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3125 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 4 |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.2mm |
| Width | 3.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT3125CDGVRE4 Overview
Digital switch is provided in the 14-TFSOP (0.173, 4.40mm Width) for the purpose of saving board space.It is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74CBT series can be used in a wide range of applications.Its basic configuration includes terminations in the 14 range.Its logic switch base part number is 74CBT3125 which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 14 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.With 14 pins, it is configured.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 4 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.mux switch's normal operation requires the power supply of 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Supply voltages of 5V can provide reliable performance of the multiplexers.A resistance of 2 governs its operation.12Ohm is the resistance at which it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT3125CDGVRE4 Features
Supplied in the 14-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3125CDGVRE4 Applications
There are a lot of Texas Instruments SN74CBT3125CDGVRE4 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- Enabling different functions units in microprocessor instruction decoding
- Microprocessor input/output systems
- To select different devices in microprocessor input
- Communication system
- Paper plants
- HDMI applications
- Microprocessor memory systems
- Make full adder
- Automatic health monitoring systems