SN74BCT573NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.2 ns |
| Turn On Delay Time | 6.1 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.6 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74BCT573NSRE4 Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at 0°C~70°C degrees Celsius. The 74BCT series contains FPGAs of this type. The electronic part in this image has 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74BCT573 is the family name of it. In order to function, the supply voltage should be set to 5V. It is equipped with 20 pin count. BCT/FBT is the family of this electronic device. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. 5V power supplies are needed to operate it. (Vsup) should be greater than 4.5V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is suitable for TAPE AND REEL. The 64mA output current gives it maximum design flexibility.
SN74BCT573NSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74BCT series
8 Bits
74BCT573 family
20 pin count
20 pins
5V power supplies
SN74BCT573NSRE4 Applications
There are a lot of Texas Instruments SN74BCT573NSRE4 Latches applications.
- Digital bus buffer
- Instrumentation
- Up-Down Johnson
- Buffer register
- Display
- Lamp and Display (LED)
- Serial Output Data Queuing
- Network Switches
- Parallel Input
- Automatic test equipment