SN74BCT373NSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74BCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 60mA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74BCT373NSR Overview
The 20-SOIC (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the packaging method. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. It is 0°C~70°C at the operating temperature. It is a type of FPGA belonging to the 74BCT series. 8 Bits are used in the design of this electronic part. A device with this design has 20 terminations. The family it belongs to is 74BCT373. A 5V voltage supply is required for operation. There are 20 pins attached to it. It is part of the family of electronic devices called BCT/FBT. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. This part is included in FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. 5V power supplies are needed to operate it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. There are 8 input lines in which electronic circuits are present. This device is well suited for TAPE AND REEL based on its reliable performance. The 64mA output current gives it maximum design flexibility.
SN74BCT373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74BCT series
8 Bits
74BCT373 family
20 pin count
20 pins
5V power supplies
SN74BCT373NSR Applications
There are a lot of Texas Instruments SN74BCT373NSR Latches applications.
- Instrumentation
- Counter control
- A/D converters
- Counter timers
- Ring counter
- Parallel data synchronization
- A/D and D/A conversion
- Relay replacement
- Four-bit storage with output enable
- Storage