SN74BCT373DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 10MHz |
| Base Part Number | 74BCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 60mA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74BCT373DW Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. This package has the format of Tube. It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. The 74BCT series is associated with this FPGA. This electronic part is designed with 8 Bits. This device has 20 terminations. As a member of the 74BCT373 family, it falls under that category. The supply voltage of the device is 5V. 20 pins are included. It is a member of the BCT/FBT family of electronic devices. With the design of the board, there are only 20 pins. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. The part belongs to the FF/Latches subcategory. 5V power supplies are needed to operate it. Electronic circuits are represented by 8 input lines. Its output current of 64mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V.
SN74BCT373DW Features
20-SOIC (0.295, 7.50mm Width) package
74BCT series
8 Bits
74BCT373 family
20 pin count
20 pins
5V power supplies
SN74BCT373DW Applications
There are a lot of Texas Instruments SN74BCT373DW Latches applications.
- Parallel data storage
- Buffer/Storage Registers
- General-Purpose Register
- Decade counting 7-segment decimal display
- Parallel Input
- Decade counting
- Four-bit storage with output enable
- Shift left register
- Bus system register with enable parallel lines at bus side
- Lamp and Display (LED)