SN74BCT373DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 60mA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74BCT373DBRE4 Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. As a result, it has a packaging of Tape & Reel (TR). In its configuration, Tri-State is used as the output. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at 0°C~70°C. This FPGA is part of the 74BCT series. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74BCT373 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. In terms of electronic devices, this one is in the BCT/FBT family. In addition, it is designed with a pin number of 20. Surface Mount is the method used for mounting this electronic part. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. 5.5V is the maximum supply voltage (Vsup). The system is powered by 5V sources. The supply voltage (Vsup) should be greater than 4.5V. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is appropriate for TAPE AND REEL. Due to its 64mA output current, it offers maximum design flexibility.
SN74BCT373DBRE4 Features
20-SSOP (0.209, 5.30mm Width) package
74BCT series
8 Bits
74BCT373 family
20 pin count
20 pins
5V power supplies
SN74BCT373DBRE4 Applications
There are a lot of Texas Instruments SN74BCT373DBRE4 Latches applications.
- Synchronous frequency dividers
- Relay replacement
- Parallel-to-Serial Data Conversion
- Display driver
- Address register
- Communication systems
- Automotive Body Electronics
- Frequency dividing
- Motor Drives
- Parallel data storage