SN74BCT373DBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 60mA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.2 ns |
| Family | BCT/FBT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74BCT373DBR Overview
A package called 20-SSOP (0.209, 5.30mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. There are a number of FPGAs in this series, including this one. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74BCT373 family. The device works with a voltage of 5V for its supply voltage. 20 pins are available on it. It is a member of the BCT/FBT family of electronic devices. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. There are 8 input lines in which electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Due to its 64mA output current, it offers maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V.
SN74BCT373DBR Features
20-SSOP (0.209, 5.30mm Width) package
74BCT series
8 Bits
74BCT373 family
20 pin count
20 pins
5V power supplies
SN74BCT373DBR Applications
There are a lot of Texas Instruments SN74BCT373DBR Latches applications.
- Double bus register system
- Shift left with parallel loading
- A/D converters
- Digital bus buffer
- Serial Output Data Queuing
- Decade counting
- Communication systems
- PCs and Notebooks
- Up-Down Johnson
- Hammer