SN74BCT29825DWR
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 5.4 ns |
| Family | BCT/FBT |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74BCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74BCT29825 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
SN74BCT29825DWR Overview
It is embeded in 24-SOIC (0.295, 7.50mm Width) case. As part of the package Tape & Reel (TR), it is embedded. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 4.5V~5.5V. Temperature is set to 0°C~70°C TA. A flip flop of this type is classified as a D-Type. The 74BCTseries comprises this type of FPGA. It should not exceed 125MHzin terms of its output frequency. A total of 1elements are present in it. T flip flop consumes 16mA quiescent energy. A total of 24 terminations have been made. It is a member of the 74BCT29825 family. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 5pF farads. It is a member of the BCT/FBTfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 24. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The power supply is 5V. There are 2 ports embedded in the flip flops. It has 5lines. In addition, you can refer to the additinal WITH CLEAR AND CLOCK ENABLE; WITH TRIPLE OUTPUT ENABLE of the D latch.
SN74BCT29825DWR Features
Tape & Reel (TR) package
74BCT series
24 pins
5V power supplies
SN74BCT29825DWR Applications
There are a lot of Texas Instruments SN74BCT29825DWR Flip Flops applications.
- Reduced system switching noise
- ESD performance
- Balanced Propagation Delays
- Individual Asynchronous Resets
- 2 – Bit synchronous counter
- Clock pulse
- Data transfer
- Guaranteed simultaneous switching noise level
- Memory
- ESCC