SN74BCT29821DW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74BCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | BCT/FBT |
| Current - Quiescent (Iq) | 10mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.048 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5.5pF |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74BCT29821DW Overview
24-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is included in the package Tube. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 4.5V~5.5Vvolts. Currently, the operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74BCT series. There should be no greater frequency than 125MHzon its output. In total, it contains 1 elements. As a result, it consumes 10mA quiescent current and is not affected by external forces. There are 24 terminations,The D flip flop is powered by a voltage of 5V . This JK flip flop has a 5.5pFfarad input capacitance. A device of this type belongs to the family of BCT/FBT. The part you are looking for is included in FF/Latches. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. It runs on 5Vvolts of power. This D flip flop is equipped with 0 ports.
SN74BCT29821DW Features
Tube package
74BCT series
5V power supplies
SN74BCT29821DW Applications
There are a lot of Rochester Electronics, LLC SN74BCT29821DW Flip Flops applications.
- High Performance Logic for test systems
- Synchronous counter
- ESD performance
- Bus hold
- Test & Measurement
- Cold spare funcion
- Bounce elimination switch
- Digital electronics systems
- Modulo – n – counter
- Count Modes