SN74AVCH4T245DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Current - Output | 12mA |
| Number of Bits | 4 |
| Propagation Delay | 2.9 ns |
| Turn On Delay Time | 10.3 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 6.3 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AVCH4T245DRG4 Overview
The SOIC package contains it.A Tape and Reel package is used to package it.As part of the transmission line termination process, there are a total of 16 terminations.In order to power the device, a voltage supply of 1.5V is required.The pin count of this device is 16.The pin configuration of the device is 16.There are 4 bits in this electronic part.There is a maximum voltage of 3.6V supported.With a minimum supply voltage of 1.2V, it operates.With the Surface Mount method, it is mounted.In Bus Driver/Transceivers, you will find this part.Logic ICs it uses are of the BUS TRANSCEIVER type.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.In the world of electronics, this electronic device belongs to the family of AVC.Power comes from a 1.5/3.3V supply.The reliability of this device indicates its suitability for TUBE as a result of its reliable performance.There are also TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B characteristics.Level translators is recommended to operate at a temperature higher than -40°C.Ideally, the temperature should not be higher than 85°C.This device has a total of 2 elements.Due to its 12mA output current, this device offers maximum design flexibility.
SN74AVCH4T245DRG4 Features
SOIC package
16 pin count
16 pins
1.5/3.3V power supplies
2 elements
SN74AVCH4T245DRG4 Applications
There are a lot of Texas Instruments SN74AVCH4T245DRG4 voltage translators & level shifters applications.
- General purpose I/O level shifting
- Industrial
- PMBus
- Telecommunications
- Handset
- SDIO
- Electronic Points of Sale
- One Assembly and Test Site
- I2C / SMBus
- Tablet