Parameters |
Factory Lead Time |
6 Weeks |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Weight |
2.494758mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74AVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Additional Feature |
TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.5V |
Base Part Number |
74AVC1T45 |
Pin Count |
6 |
Number of Outputs |
2 |
Output Type |
Tri-State, Non-Inverted |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.2V |
Number of Ports |
2 |
Output Current |
50mA |
Number of Bits |
1 |
Propagation Delay |
2.8 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
5.6 ns |
Family |
AVC |
Logic Function |
Translator |
Data Rate |
500Mbps |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-12mA |
Channel Type |
Bidirectional |
Low Level Output Current |
12mA |
Control Type |
COMMON CONTROL |
Translator Type |
Voltage Level |
Voltage - VCCA |
1.2V~3.6V |
Voltage - VCCB |
1.2V~3.6V |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AVC1T45DCKR Overview
In the 6-TSSOP, SC-88, SOT-363 package, it is embedded.Packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.There is Voltage Level translator type for this electrical device.This electronic part is mounted in the way of Surface Mount.Bidirectional is the type of channel for this electrical device.During operation, the temperature is set to -40°C~85°C TA.Transmission lines are terminated using 6 terminations.Parts related to a base part number 74AVC1T45 are designated by the same number.A supply voltage of 1.5V powers it.Level translators is equipped wLevel translatorsh 6 pin count.The device is part of the 74AVC series.The board has 6 pins.There are 1 bits in this electronic part.Voltages above 3.6V are supported.With a minimum supply voltage of 1.2V, it operates.There is a configuration of 1.2V~3.6V for the VCCA supply rail.In the VCCB, the supply rail is set to 1.2V~3.6V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.1 is the number of channels available in the system.Level translators belongs to the group of Bus Driver/Transceivers.Level translators uses the logic IC BUS TRANSCEIVER.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.Level translators is part of the family of electronic devices called AVC.Level translators consumes 20μA of quiescent current wLevel translatorshout being affected by outside factors.As a result of its reliable performance, it is well suited for TR.As a result of its 50mA output current, it allows for maximum design flexibility.Level translators is also characterized by TWO SEPARATE CONFIGURABLE POWER SUPPLY RAILS FOR PORT A AND PORT B.Level translators is configured wLevel translatorsh 2 outputs.
SN74AVC1T45DCKR Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
74AVC series
6 pins
2 outputs
SN74AVC1T45DCKR Applications
There are a lot of Texas Instruments SN74AVC1T45DCKR voltage translators & level shifters applications.
- Motor Drives
- Eliminate Slow or Noisy Input Signals
- Debouncing a mechanical switch
- Product Traceability
- SMBus
- UART
- Routers (Telecom Switching Equipment)
- Routers (routing equipment)
- TVs
- Servers