SN74AUCH16374DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AUCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.8 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AUC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 2.2ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUCH16374DGGR Overview
In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 0.8V~2.7V. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74AUCH series. It should not exceed 250MHzin terms of its output frequency. There are 2 elements in it. T flip flop consumes 20μA quiescent energy. There have been 48 terminations. The 74AUCH16374family includes it. Power is supplied from a voltage of 1.2V volts. Its input capacitance is 3pFfarads. Devices in the AUCfamily are electronic devices. It is mounted by the way of Surface Mount. The 48pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 16bits are used in this part. In view of its reliability, this D flip flop is a good fit for TR. The flip flop has 2embedded ports. It is designed with 8 output lines.
SN74AUCH16374DGGR Features
Tape & Reel (TR) package
74AUCH series
48 pins
16 Bits
SN74AUCH16374DGGR Applications
There are a lot of Texas Instruments SN74AUCH16374DGGR Flip Flops applications.
- ESCC
- Asynchronous counter
- Dynamic threshold performance
- Storage Registers
- Control circuits
- Bounce elimination switch
- Parallel data storage
- Buffer registers
- Reduced system switching noise
- Divide a clock signal by 2 or 4