SN74AUC1G79DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC1G79 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Output Current | 9mA |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 5 ns |
| Family | AUC |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G79DBVR Overview
SC-74A, SOT-753is the packaging method. You can find it in the Cut Tape (CT)package. T flip flop is configured with an output of Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 0.8V~2.7V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74AUC series. You should not exceed 275MHzin the output frequency of the device. As a result, it consumes 10μA quiescent current and is not affected by external forces. A total of 5terminations have been recorded. The 74AUC1G79 family contains it. The power supply voltage is 1.2V. There is 2.5pF input capacitance for this T flip flop. It is a member of the AUCfamily of D flip flop. It is mounted by the way of Surface Mount. It is designed with 5 pins. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 1. The maximal supply voltage (Vsup) reaches 2.7V. It is imperative that the supply voltage (Vsup) is maintained above 0.8Vin order to ensure normal operation. To achieve this superior flexibility, 1 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. It offers maximum design flexibility with its output current of 9mA.
SN74AUC1G79DBVR Features
Cut Tape (CT) package
74AUC series
5 pins
1 Bits
SN74AUC1G79DBVR Applications
There are a lot of Texas Instruments SN74AUC1G79DBVR Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Control circuits
- Set-reset capability
- Counters
- Event Detectors
- Storage Registers
- Single Up Count-Control Line
- Data transfer
- Clock pulse
- Safety Clamp