SN74AUC1G74DCURE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AUC1G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 275MHz |
| Propagation Delay | 2.4 ns |
| Turn On Delay Time | 9.5 ns |
| Family | AUC |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 1.8ns @ 2.5V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| fmax-Min | 275 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 200000000Hz |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G74DCURE4 Overview
The item is packaged in 8-VFSOP (0.091, 2.30mm Width)cases. There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 0.8V~2.7Vvolt supply, it operates as follows. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74AUCseries FPGA. It should not exceed 275MHzin terms of its output frequency. Despite external influences, it consumes 10μAof quiescent current. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AUC1G74family includes it. A voltage of 1.2V provides power to the D latch. JK flip flop input capacitance is 2.5pF farads. AUCis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. This board has 8 pins. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. This flip flop is designed with 1 Bits. The maximal supply voltage (Vsup) reaches 2.7V. Despite its superior flexibility, it relies on 1 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TR.
SN74AUC1G74DCURE4 Features
Tape & Reel (TR) package
74AUC series
8 pins
1 Bits
SN74AUC1G74DCURE4 Applications
There are a lot of Texas Instruments SN74AUC1G74DCURE4 Flip Flops applications.
- Counters
- ESCC
- Frequency Dividers
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
- Clock pulse
- Digital electronics systems
- Computing
- Matched Rise and Fall
- Load Control