SN74AUC1G19DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Base Part Number | 74AUC1G19 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Max Output Current | 9mA |
| Number of Elements | 1 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Bits | 1 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.5 ns |
| Family | AUC |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 9mA 9mA |
| Supply Type | Single |
| Max I(ol) | 0.009 A |
| Prop. Delay@Nom-Sup | 3 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC1G19DCKT Overview
Digital switch is provided in the 6-TSSOP, SC-88, SOT-363 for the purpose of saving board space.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 0.8V~2.7V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74AUC series, these multiplexers have a wide range of applications.Among its basic configurations are 6 terminations.In addition, it also has a base part number of 74AUC1G19, which can be used to find related parts.For multiplexer's system, a voltage of 1.1V is supplied.In this turn signal switch, there are 6 components that can be connected to each pin.GULL WING represents the end of conductors.Single is employed as its supply type.It is configured with 6 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of AUC the logic switch is a member.In the signal multiplexer, there are 1 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 0.8V.The turn signal switch has 2 outputs designed for operation.The digital switch ic is an electronic part classified into Decoder/Drivers.No external influence consumes 10μA current of multiplexer ic.The switches package is packaged in a way which is consistent with TR.There are 1 elements used for the mux switch configuration.
SN74AUC1G19DCKT Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
SN74AUC1G19DCKT Applications
There are a lot of Texas Instruments SN74AUC1G19DCKT Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Seven segment displays
- Relay
- Small scale TV wall
- Transmission from the computer system of a satellite
- Used to connect a single source to multiple destinations
- Video transmission
- VGA
- HDMI applications
- Image transmission