SN74AUC16374DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AUC16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Output Current | 9mA |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.8 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AUC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 2.2ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUC16374DGVR Overview
The flip flop is packaged in a case of 48-TFSOP (0.173, 4.40mm Width). It is contained within the Cut Tape (CT)package. T flip flop uses Tri-State, Non-Invertedas the output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 0.8V~2.7Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. FPGAs belonging to the 74AUCseries contain this type of chip. This D flip flop should not have a frequency greater than 250MHz. In total, it contains 2 elements. There is 20μA quiescent consumption. A total of 48terminations have been recorded. You can search similar parts based on 74AUC16374. The D flip flop is powered by a voltage of 1.2V . The input capacitance of this JK flip flopis 3pF farads. In terms of electronic devices, this device belongs to the AUCfamily of devices. Surface Mount mounts this electronic component. A total of 48pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 16bits in its design. This D flip flop is well suited for TR based on its reliable performance. This flip flop has a total of 2ports. Featuring the maximum design flexibility, it has an output current of 9mA . There are 8 output lines on it.
SN74AUC16374DGVR Features
Cut Tape (CT) package
74AUC series
48 pins
16 Bits
SN74AUC16374DGVR Applications
There are a lot of Texas Instruments SN74AUC16374DGVR Flip Flops applications.
- CMOS Process
- Matched Rise and Fall
- Frequency division
- QML qualified product
- Synchronous counter
- Dynamic threshold performance
- Registers
- Buffered Clock
- Data transfer
- Pattern generators