SN74AUC16374DGGR
| Parameters | |
|---|---|
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AUC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AUC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Output Current | 9mA |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 2.8 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AUC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 9mA 9mA |
| Max I(ol) | 0.009 A |
| Max Propagation Delay @ V, Max CL | 2.2ns @ 2.5V, 30pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
SN74AUC16374DGGR Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. A package named Cut Tape (CT)includes it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A supply voltage of 0.8V~2.7V is required for operation. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74AUC series. Its output frequency should not exceed 250MHz. A total of 2 elements are present. As a result, it consumes 20μA quiescent current. There have been 48 terminations. The 74AUC16374 family contains it. A voltage of 1.2V is used as the power supply for this D latch. A JK flip flop with a 3pFfarad input capacitance is used here. Electronic devices of this type belong to the AUCfamily. There is an electronic part mounted in the way of Surface Mount. The 48pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. There are 16bits in its design. A reliable performance of this D flip flop makes it well suited for use in TR. This flip flop has a total of 2ports. With a current output of 9mA , it offers maximum design flexibility. It operates with 8 output lines.
SN74AUC16374DGGR Features
Cut Tape (CT) package
74AUC series
48 pins
16 Bits
SN74AUC16374DGGR Applications
There are a lot of Texas Instruments SN74AUC16374DGGR Flip Flops applications.
- High Performance Logic for test systems
- ESCC
- Data storage
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
- Communications
- Buffered Clock
- Dynamic threshold performance
- Digital electronics systems
- Data Synchronizers