SN74AS576DW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Clock Frequency | 125MHz |
| Current - Quiescent (Iq) | 125mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
SN74AS576DW Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. The output it is configured with uses Tri-State, Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. The 74ASseries comprises this type of FPGA. You should not exceed 125MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 125mA of quiescent current without being affected by external factors.
SN74AS576DW Features
Tube package
74AS series
SN74AS576DW Applications
There are a lot of Rochester Electronics, LLC SN74AS576DW Flip Flops applications.
- Bounce elimination switch
- Control circuits
- Divide a clock signal by 2 or 4
- Shift registers
- Patented noise
- Balanced 24 mA output drivers
- Load Control
- Asynchronous counter
- Buffered Clock
- ATE