SN74AS4374BDWG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | DUAL-RANK FLIP-FLOP |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS4374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 2 ns |
| Family | AS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 150mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
SN74AS4374BDWG4 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is embedded in the Tube package. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at 0°C~70°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74ASseries of FPGAs. A frequency of 125MHzshould not be exceeded by its output. In total, there are 1 elements. It consumes 150mA of quiescent current without being affected by external factors. There have been 20 terminations. If you search by 74AS4374, you will find similar parts. It is powered from a supply voltage of 5V. In terms of electronic devices, this device belongs to the ASfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. There are 5V power supplies attached to it. The flip flop contains 2ports. The 48mA output current allows it to be designed with the greatest amount of flexibility. It is reported that there are 8 input lines. In addition, DUAL-RANK FLIP-FLOPis a characteristic of it.
SN74AS4374BDWG4 Features
Tube package
74AS series
20 pins
8 Bits
5V power supplies
SN74AS4374BDWG4 Applications
There are a lot of Texas Instruments SN74AS4374BDWG4 Flip Flops applications.
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
- Dynamic threshold performance
- Storage Registers
- Asynchronous counter
- Automotive
- Registers
- ESD performance
- Guaranteed simultaneous switching noise level