SN74AS373DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 90mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Family | AS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AS373DWRE4 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. A package of Tape & Reel (TR) has been used. It uses the output configuration Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. A 4.5V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is 0°C~70°C. An FPGA of this type belongs to the 74AS series. With this electronic part, there are 8 bits. A device with this design has 20 terminations. The family in which it belongs to is 74AS373. The device is operated when the supply voltage is set to 5V. With 20 pins, it is equipped. This electronic device is categorized as a AS electronic device. It is designed with 20 pins. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 5.5V. A total of 5V power supplies are needed to run it. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TAPE AND REEL. The output current of 24mA makes it feature maximum design flexibility.
SN74AS373DWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS373 family
20 pin count
20 pins
5V power supplies
SN74AS373DWRE4 Applications
There are a lot of Texas Instruments SN74AS373DWRE4 Latches applications.
- Hammer
- Decade counting
- Shift Registers
- Frequency dividing
- Phase comparator
- Digital bus buffer
- Multistage ripple counting
- Motor Drives
- Flip-flops
- Serial Output Data Queuing