SN74AS373DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AS373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 90mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Family | AS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AS373DWR Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It is 0°C~70°C at the operating temperature. In the 74AS series, this FPGA is located. An electronic part with 8 bits is designed. In this device, there are 20 terminations that have been designed. It is a member of the 74AS373 family. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. AS is the family of this electronic device. 20 pins are used in its design. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are needed to run it. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This device is well suited for TAPE AND REEL based on its reliable performance. It features maximum flexibility in design due to 24mA output current. If you want to achieve high efficiency, make sure the supply voltage is at 5V.
SN74AS373DWR Features
20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS373 family
20 pin count
20 pins
5V power supplies
SN74AS373DWR Applications
There are a lot of Texas Instruments SN74AS373DWR Latches applications.
- Automatic test equipment
- Parallel-to-Serial Data Conversion
- Watches
- Digital bus buffer
- Motor Drives
- Up/down difference counting
- TV Set-top Boxes
- Parallel data storage
- Bus system register with enable parallel lines at bus side
- Display driver