SN74ALVTH16374GR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVTH16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 1.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100μA |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVTH16374GR Overview
The package is in the form of 48-TFSOP (0.240, 6.10mm Width). D flip flop is embedded in the Cut Tape (CT) package. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 2.3V~2.7V 3V~3.6V volts, it operates. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74ALVTHseries of FPGAs. A frequency of 250MHzshould not be exceeded by its output. The element count is 2 . During its operation, it consumes 100μA quiescent energy. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74ALVTH16374 family contains this object. Power is provided by a 2.5V supply. Its input capacitance is 3.5pF farads. It is mounted in the way of Surface Mount. It is designed with 48 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 16bits has been designed. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The flip flop contains 2ports. The output current of 64mA makes it feature maximum design flexibility. In order to operate, the chip has 1 output lines. This input has 3lines in it.
SN74ALVTH16374GR Features
Cut Tape (CT) package
74ALVTH series
48 pins
16 Bits
SN74ALVTH16374GR Applications
There are a lot of Texas Instruments SN74ALVTH16374GR Flip Flops applications.
- Event Detectors
- Test & Measurement
- Frequency Dividers
- Set-reset capability
- Data transfer
- Count Modes
- Buffer registers
- ATE
- Single Up Count-Control Line
- Power down protection