SN74ALVCH374PWR
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ALVCH374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
SN74ALVCH374PWR Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. There is an embedded version in the package Cut Tape (CT). T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. It operates with a supply voltage of 1.65V~3.6V. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ALVCHseries of FPGAs. A frequency of 150MHzshould not be exceeded by its output. The element count is 1 . As a result, it consumes 10μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. The object belongs to the 74ALVCH374 family. It is powered from a supply voltage of 1.8V. This T flip flop has a capacitance of 5pF farads at the input. The electronic device belongs to the ALVC/VCX/Afamily. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. There are 8bits in its design. To achieve this superior flexibility, 8 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. The flip flop has 2ports embedded within it. This T flip flop features a maximum design flexibility due to its output current of 24mA. This input has 3lines.
SN74ALVCH374PWR Features
Cut Tape (CT) package
74ALVCH series
20 pins
8 Bits
SN74ALVCH374PWR Applications
There are a lot of Texas Instruments SN74ALVCH374PWR Flip Flops applications.
- Instrumentation
- Synchronous counter
- Test & Measurement
- Balanced Propagation Delays
- Control circuits
- Power down protection
- Pattern generators
- Asynchronous counter
- Shift registers
- ATE