SN74ALVCH374PW
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
SN74ALVCH374PW Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 1.65V~3.6V volts, it operates. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. It belongs to the 74ALVCHseries of FPGAs. It should not exceed 150MHzin its output frequency. In total, there are 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. There are 20 terminations,You can search similar parts based on 74ALVCH374. A voltage of 1.8V provides power to the D latch. This T flip flop has a capacitance of 5pF farads at the input. It belongs to the family of electronic devices known as ALVC/VCX/A. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 8bits in its design. The superior flexibility is achieved through the use of 8 circuits. The D flip flop is embedded with 2ports. With a current output of 24mA , it offers maximum design flexibility. This input has 3lines in it.
SN74ALVCH374PW Features
Tube package
74ALVCH series
20 pins
8 Bits
SN74ALVCH374PW Applications
There are a lot of Texas Instruments SN74ALVCH374PW Flip Flops applications.
- Modulo – n – counter
- Single Up Count-Control Line
- Matched Rise and Fall
- Synchronous counter
- High Performance Logic for test systems
- Frequency Dividers
- Dynamic threshold performance
- 2 – Bit synchronous counter
- Memory
- Automotive