SN74ALVCH374DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1.1 ns |
| Family | ALVC/VCX/A |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH374DWRE4 Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. It is operating at a temperature of -40°C~85°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74ALVCH series. A frequency of 150MHzshould not be exceeded by its output. D latch consists of 1 elements. Despite external influences, it consumes 10μAof quiescent current. It has been determined that there have been 20 terminations. Members of the 74ALVCH374family make up this object. Power is provided by a 1.8V supply. Input capacitance of this device is 5pF farads. In this case, the D flip flop belongs to the ALVC/VCX/Afamily. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The flip flop has 2ports embedded within it. To operate, the chip has a total of 3 output lines.
SN74ALVCH374DWRE4 Features
Tape & Reel (TR) package
74ALVCH series
20 pins
8 Bits
SN74ALVCH374DWRE4 Applications
There are a lot of Texas Instruments SN74ALVCH374DWRE4 Flip Flops applications.
- Buffer registers
- Frequency division
- Shift Registers
- Frequency Dividers
- Test & Measurement
- Clock pulse
- Consumer
- Reduced system switching noise
- Asynchronous counter
- Balanced 24 mA output drivers