SN74ALVCH16721DGVR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH CLOCK ENABLE |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G56 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | ALVC/VCX/A |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 20 |
| Max Propagation Delay @ V, Max CL | 4.3ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 5.6 ns |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVCH16721DGVR Overview
In the form of 56-TFSOP (0.173, 4.40mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74ALVCH series. It should not exceed 150MHzin terms of its output frequency. The element count is 1 . It consumes 40μA of quiescent There are 56 terminations,Power is supplied from a voltage of 1.8V volts. Its input capacitance is 3.5pF farads. In terms of electronic devices, this device belongs to the ALVC/VCX/Afamily of devices. Vsup reaches its maximum value at 3.6V. A total of 2ports are embedded in the D flip flop. There is also a characteristic of WITH CLOCK ENABLE.
SN74ALVCH16721DGVR Features
Tape & Reel (TR) package
74ALVCH series
SN74ALVCH16721DGVR Applications
There are a lot of Rochester Electronics, LLC SN74ALVCH16721DGVR Flip Flops applications.
- Set-reset capability
- Individual Asynchronous Resets
- Functionally equivalent to the MC10/100EL29
- Counters
- Single Down Count-Control Line
- Instrumentation
- Control circuits
- Synchronous counter
- Buffer registers
- Consumer