SN74ALVCH162721DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74ALVCH162721 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 20 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH162721DL Overview
56-BSSOP (0.295, 7.50mm Width)is the way it is packaged. There is an embedded version in the package Tube. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 1.65V~3.6V. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74ALVCH series. A frequency of 150MHzshould not be exceeded by its output. A total of 1elements are present in it. Despite external influences, it consumes 40μAof quiescent current. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ALVCH162721family includes it. The D flip flop is powered by a voltage of 1.8V . There is 3.5pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the ALVC/VCX/Afamily. It is mounted by the way of Surface Mount. A total of 56pins are provided on this board. This device's clock edge trigger type is Positive Edge. The part is included in Bus Driver/Transceiver. Flip flops designed with 20bits are used in this part. A total of 2ports are embedded in the D flip flop. With an output current of 12mA, this device offers maximum design flexibility. It has 3 output lines to operate. This input has 20lines in it.
SN74ALVCH162721DL Features
Tube package
74ALVCH series
56 pins
20 Bits
SN74ALVCH162721DL Applications
There are a lot of Texas Instruments SN74ALVCH162721DL Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Data transfer
- ESCC
- Storage registers
- Matched Rise and Fall
- Divide a clock signal by 2 or 4
- Memory
- Latch-up performance
- Dynamic threshold performance
- Shift Registers