SN74ALVCH16270DGGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCH16270 |
| Pin Count | 56 |
| Number of Outputs | 12 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 12 ~ 24-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 3 |
| Nominal Supply Current | 250mA |
| Output Current | 24mA |
| Max Supply Current | 40μA |
| Number of Bits | 24 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 7.2 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Registered Bus Exchanger |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALVCH16270DGGR Overview
It is embedded in the 56-TFSOP (0.240, 6.10mm Width) package. Packaged in the manner of Cut Tape (CT). It achieves superior flexibility through 12 ~ 24-Bit circuits. Logic type Registered Bus Exchanger is used on this electrical device. There is an electronic part that is mounted in a Surface Mount-shaped arrangement. Over -40°C~85°C, the operating temperature should be higher. The High/Low output current of 24mA 24mA makes it feature maximum design flexibility. It belongs to the 74ALVCH series of FPGAs. It operates at a voltage of 1.65V~3.6V. As it belongs to the 74ALVCH16270 family, it should be taken into consideration. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Normal operation requires an output voltage above 1.8V. It is equipped with 56 pin count. It is designed with 24 Bits. There are a number of termination types, including 3 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. It is mounted in the way of Surface Mount so that this electronic part can be seen. It is designed with 56 pins. In the family of ALVC/VCX/A devices, this electronic device belongs. When Vsup reaches 3.6V, the maximum supply voltage has been reached. The power source is 3.3V. In this case, it is made up of 1 elements. 24mA's output current allows it to be designed in a wide variety of ways. Other Logic ICs includes this part. It is in this case that 40μA of quiescent current is consumed without being affected by external factors in any way. There are 12 outputs configured on it. In order to operate, a maximum current of 40μA is supplied.
SN74ALVCH16270DGGR Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
74ALVCH16270 family
56 pin count
56 pins
3.3V power supplies
1 elements
12 outputs
SN74ALVCH16270DGGR Applications
There are a lot of Texas Instruments SN74ALVCH16270DGGR Universal Bus Functions applications.
- Digital system
- Digital watch
- Industrial Controls
- Home theater
- Electrical tools
- Small and medium distributed photovoltaic power generation system
- Safety thermostat
- Microprocessors
- Street lights
- measuring instrument