SN74ALVC162836DLR
| Parameters | |
|---|---|
| Number of Ports | 2 |
| Number of Bits | 20 |
| Propagation Delay | 5.5 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Universal Bus Driver |
| Max I(ol) | 0.012 A |
| Prop. Delay@Nom-Sup | 4 ns |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVC162836 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 20-Bit |
| Load Capacitance | 50pF |
SN74ALVC162836DLR Overview
It is embedded in the 56-BSSOP (0.295, 7.50mm Width) package. I have packaged it in a way that is similar to Tape & Reel (TR)'s. It achieves superior flexibility through 20-Bit circuits. This electrical device is of the Universal Bus Driver logic type. A Surface Mount-shaped electronic component is mounted here. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. Due to its high and low output current options, 12mA 12mA's maximum level of flexibility is achieved when it comes to designing its features. An FPGA of this type belongs to the series 74ALVC and belongs to the category of FPGAs. It operates at a voltage of 1.65V~3.6V. It is a member of the 74ALVC162836 family. The 56 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. It is important to keep the supply voltage above 1.8V for normal operation. The 56 pin count is provided. In order to design this electronic part, 20 Bits have been used. The 2 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. This electronic part is mounted in the way of Surface Mount. 56 pins are used in the design of this board. There is an electronic device in this family called ALVC/VCX/A. Upon reaching 3.6V, Vsup reaches its maximal value. There should be a difference between Vsup and 1.65V in the supply voltage. The power source is 3.3V. The reliability of this device makes it well suited for TAPE AND REEL as a result of its proven reliability. There is a part included in Bus Driver/Transceivers that is similar to this one.
SN74ALVC162836DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVC series
74ALVC162836 family
56 pin count
56 pins
3.3V power supplies
SN74ALVC162836DLR Applications
There are a lot of Texas Instruments SN74ALVC162836DLR Universal Bus Functions applications.
- CD player
- automatic temperature control circuits
- Electrical tools
- Illumination
- VCD
- Digital camera
- CMOS circuitry
- Automatic watering system
- Range hood
- Grid adaptation function