SN74ALS666DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS666 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 73mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALS666DWRE4 Overview
In the 24-SOIC (0.295, 7.50mm Width) package, it is embedded. Packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. The 74ALS series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. The device consists of 24 terminations that are designed to be used in conjunction with it. The family 74ALS666 includes it. The supply voltage of the device is 5V. With 24 pins, it is equipped. ALS is the family name of this electronic device. The device has 24 pins. A Surface Mount mounting method has been used for this electronic part. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 5V power supplies are needed to run it. A supply voltage (Vsup) greater than 4.5V is required. There are electronic circuits attached to the 8 input lines. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. As the output current is 24mA, the design flexibility is maximum. There are also characteristics of WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK associated with it.
SN74ALS666DWRE4 Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS666 family
24 pin count
24 pins
5V power supplies
SN74ALS666DWRE4 Applications
There are a lot of Texas Instruments SN74ALS666DWRE4 Latches applications.
- Pattern generators
- Frequency
- Buffer/Storage Registers
- Double bus register system
- Registers
- Multistage ripple counting
- Automotive Cluster
- Watches
- Programmable binary
- Multi-line decoders