SN74ALS666DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS666 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 73mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS666DWG4 Overview
In the package 24-SOIC (0.295, 7.50mm Width), it can be found. Tube is the way in which it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is set as the operating temperature. This FPGA is part of the 74ALS series. An electronic part with 8 bits is designed. This device is designed with 24 terminations. 74ALS666 is the family name of it. A 5V voltage supply is required for operation. There are 24 pins on it. There is a device in this electronic family called ALS. 24 pins are used in its design. Surface Mount is the method used for mounting this electronic part. 2 ports are available on this device. Subcategory FF/Latches includes this part. There is 5V power supply for it. It contains 8 input lines where electronic circuits are present. Its output current of 24mA ensures maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK are also a characteristic of it.
SN74ALS666DWG4 Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS666 family
24 pin count
24 pins
5V power supplies
SN74ALS666DWG4 Applications
There are a lot of Texas Instruments SN74ALS666DWG4 Latches applications.
- Shift Registers
- Automatic test equipment
- Display
- Automotive HEV/EV Powertrain
- Instrumentation
- Shift register
- Buffer/Storage Registers
- Phase comparator
- Sample and hold register
- Parallel Input