SN74ALS533ADWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALS533ADWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Tape & Reel (TR) is the packaging method. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. There is a temperature of 0°C~70°C at which the system operates. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device is designed with 20 terminations. The family it belongs to is 74ALS533. With the supply voltage set at 5V, it is able to operate. The 20 pind are equipped with it. It is part of the family of electronic devices called ALS. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. An electronic circuit can be found on 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL. With 24mA, maximum design flexibility is ensured. Optimal efficiency requires 5V as the supply voltage.
SN74ALS533ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS533 family
20 pin count
20 pins
5V power supplies
SN74ALS533ADWR Applications
There are a lot of Texas Instruments SN74ALS533ADWR Latches applications.
- Digital bus buffer
- Counter
- Network Switches
- Avionics
- High-speed logic
- Shift right register
- A/D and D/A conversion
- Up-Down Johnson
- Shift right with parallel loading
- Automotive Body Electronics