SN74ALS533ADW
| Parameters | |
|---|---|
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Quiescent Current | 18.5mA |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Base Part Number | 74ALS533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
SN74ALS533ADW Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A Tube package is used to package it. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. The 74ALS series of FPGAs is the one this FPGA belongs to. This electronic part is designed with 8 Bits. As far as this device is concerned, it has no terminations. This type belongs to the 74ALS533 family. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. There is a device in this electronic family called ALS. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. This device has a total of 2 ports. Subcategory Bus Driver/Transceiver contains this part. The system is powered by 5V sources. In the circuit, there are 8 input lines that are constituted by an electronic circuit. The 24mA output current gives it maximum design flexibility. High efficiency requires a supply voltage of 5V. Without external influences, it consumes 18.5mA of quiescent current.
SN74ALS533ADW Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS533 family
20 pin count
20 pins
5V power supplies
SN74ALS533ADW Applications
There are a lot of Texas Instruments SN74ALS533ADW Latches applications.
- Stacked or Push-Down Registers
- Registers
- A/D converters
- Multistage ripple counting
- Multi-line decoders
- Synchronous frequency dividers
- Digital bus buffer
- Shift register
- Relay replacement
- Hammer Device Information