SN74ALS374ANG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ALS374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
SN74ALS374ANG4 Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). It is included in the package Tube. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. The type of this D latch is D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. You should not exceed 35MHzin its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 19mAof quiescent current. The 74ALS374family includes it.
SN74ALS374ANG4 Features
Tube package
74ALS series
SN74ALS374ANG4 Applications
There are a lot of Texas Instruments SN74ALS374ANG4 Flip Flops applications.
- Cold spare funcion
- ATE
- Safety Clamp
- Individual Asynchronous Resets
- Consumer
- Set-reset capability
- Synchronous counter
- Pattern generators
- Circuit Design
- Memory