SN74ALS29821DWR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Ports | 2 |
| Family | ALS |
| Current - Quiescent (Iq) | 115mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS29821DWR Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. The Tape & Reel (TR)package contains it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. Currently, the operating temperature is 0°C~70°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74ALS series. In total, there are 1 elements. It consumes 115mA of quiescent A total of 24terminations have been recorded. A voltage of 5V provides power to the D latch. ALSis the family of this D flip flop. Vsup reaches 5.25V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be above 4.75V. The D flip flop has no ports embedded. In addition, POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTIONis a characteristic of it.
SN74ALS29821DWR Features
Tape & Reel (TR) package
74ALS series
SN74ALS29821DWR Applications
There are a lot of Rochester Electronics, LLC SN74ALS29821DWR Flip Flops applications.
- Bounce elimination switch
- ESD protection
- Set-reset capability
- ESCC
- High Performance Logic for test systems
- Reduced system switching noise
- Storage Registers
- Shift Registers
- Balanced Propagation Delays
- Data Synchronizers