SN74ALS273DW
| Parameters | |
|---|---|
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 29mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
SN74ALS273DW Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is 0°C~70°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ALSseries FPGA. A frequency of 35MHzshould be the maximum output frequency. A total of 1elements are present in it. During its operation, it consumes 20mA quiescent energy. A total of 20terminations have been recorded. It is a member of the 74ALS273 family. Power is provided by a 5V supply. It is a member of the ALSfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latch. It is designed with 8bits. 8 circuits are used to achieve its superior flexibility. In order for the device to operate, it requires 5V power supplies. Optimal efficiency requires a supply voltage of 5V. Featuring the maximum design flexibility, it has an output current of 24mA . This input has 3lines in it.
SN74ALS273DW Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS273DW Applications
There are a lot of Texas Instruments SN74ALS273DW Flip Flops applications.
- Single Up Count-Control Line
- CMOS Process
- Bus hold
- Matched Rise and Fall
- Control circuits
- Latch-up performance
- ESD protection
- Frequency Dividers
- Digital electronics systems
- Data transfer