SN74ALS191AN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | 74ALS191 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 37 ns |
| Turn On Delay Time | 37 ns |
| Family | ALS |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 22mA |
| Clock Edge Trigger Type | Positive Edge |
| Load/Preset Input | YES |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS191AN Overview
It is a device supplied in the 16-DIP (0.300, 7.62mm) package. Using 16terminations, it can be configured. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. In this diagram, there are 1elements that are interconnected by wires. The total number of component pins is 16. It is packaged in a manner consistent with Tube. As part of the circuit, there are 16pins that connect other components. It is mounted in the direction of [0]. In this case, it appears as a member of the ALS family. As a member of the 74ALSseries, it is ideal for a wide range of applications. It is adopted that the logic type is [0]. The operating temperature should be set at 0°C~70°C. This device is mounted in a Through Holemanner. In the case of a supply voltage of [0], it operates more reliably. Each element in the array stores 4 bits. In regard to this electronic device, TCO OUTPUTare essential features. Further related parts may be found under the base part number 74ALS191. From the voltage source, there is a voltage of 5V volts. The device operates on voltage [0]. It operates with the frequency of 30MHz.
SN74ALS191AN Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 30MHz
SN74ALS191AN Applications
There are a lot of Texas Instruments SN74ALS191AN Counters & Dividers applications.
- Dual Up Counters
- DIVISION
- MULTIPLICATION
- Timers
- POWER COMPUTATION
- ANALOG SIGNAL PROCESSING
- Counter control/timers
- ALGEBRAIC COMPUTATION
- Communications Digital Frequency Synthesizers;
- Frequency dividers