SN74ALS174NSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 19mA |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS174NSR Overview
The item is packaged in 16-SOIC (0.209, 5.30mm Width)cases. Package Cut Tape (CT)embeds it. Currently, the output is configured to use Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. 0°C~70°C TAis the operating temperature. This electronic flip flop is of type D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 50MHz. The element count is 1 . It has been determined that there have been 16 terminations. D latch belongs to the 74ALS174 family. Power is provided by a 5V supply. An electronic device belonging to the family ALScan be found here. There is an electronic part that is mounted in the way of Surface Mount. A total of 16pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. To achieve this superior flexibility, 7 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TR. A total of 5V power supplies are needed to run it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 8mA, it is possible to design the device in any way you want. There are 2 output lines in this JK flip flop. This input has 3lines. In terms of quiescent current, it consumes 19mA .
SN74ALS174NSR Features
Cut Tape (CT) package
74ALS series
16 pins
5V power supplies
SN74ALS174NSR Applications
There are a lot of Texas Instruments SN74ALS174NSR Flip Flops applications.
- Test & Measurement
- Shift Registers
- Supports Live Insertion
- Storage Registers
- Convert a momentary switch to a toggle switch
- Frequency division
- Balanced Propagation Delays
- Patented noise
- Digital electronics systems
- Buffered Clock