SN74AHCT74DGVR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 41.787197mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT74DGVR Overview
As a result, it is packaged as 14-TFSOP (0.173, 4.40mm Width). The package Cut Tape (CT)contains it. In the configuration, Differentialis used as the output. It is configured with a trigger that uses a value of Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. -40°C~125°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74AHCTseries contain this type of chip. You should not exceed 140MHzin the output frequency of the device. During its operation, it consumes 2μA quiescent energy. Currently, there are 14 terminations. Members of the 74AHCT74family make up this object. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 2pF farads at the input. An electronic device belonging to the family AHCT/VHCT/VTcan be found here. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. Due to its superior flexibility, it uses 2 circuits. This D flip flop is well suited for TR based on its reliable performance. It runs on 5Vvolts of power. In order to ensure high efficiency, the supply voltage should remain at 5V. Currently, there are 4 lines of input.
SN74AHCT74DGVR Features
Cut Tape (CT) package
74AHCT series
14 pins
5V power supplies
SN74AHCT74DGVR Applications
There are a lot of Texas Instruments SN74AHCT74DGVR Flip Flops applications.
- Frequency Dividers
- Computing
- QML qualified product
- ATE
- Functionally equivalent to the MC10/100EL29
- Frequency division
- ESD performance
- Control circuits
- 2 – Bit synchronous counter
- Pattern generators