SN74AHCT573NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT573NSRG4 Overview
20-SOIC (0.209, 5.30mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. The operating temperature is -40°C~85°C. In the 74AHCT series, this FPGA is located. An electronic part with 8 bits is designed. The device consists of 20 terminations that are designed to be used in conjunction with it. 74AHCT573 is its family. A 5V voltage supply is required for operation. With 20 pins, it is equipped. It is part of the family of electronic devices called AHCT/VHCT/VT. It is designed with 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 5V power supplies are required for it to operate. A voltage greater than 4.5V must be supplied as a power supply (Vsup). Input Lines consist of electronic circuits, and there are 8. As a result of its reliable performance, it is well suited for TAPE AND REEL. The output current of 8mA makes it feature maximum design flexibility.
SN74AHCT573NSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573NSRG4 Applications
There are a lot of Texas Instruments SN74AHCT573NSRG4 Latches applications.
- Shift Registers
- Hammer Device Information
- Motor Drives
- Decade counting 7-segment decimal display
- Parallel Input
- High-speed logic
- Synchronous frequency dividers
- Sample and hold register
- Shift left with parallel loading
- Pattern Generators