SN74AHCT373N
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | 74AHCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
SN74AHCT373N Overview
A package called 20-DIP (0.300, 7.62mm) contains it. Tube is the way in which it is packaged. Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. A Through Hole mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 74AHCT family. This electronic part is designed with 8 Bits. This device has 20 terminations. The family in which it belongs to is 74AHCT373. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of AHCT/VHCT/VT. In addition, it is designed with a pin number of 20. Through Hole is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. Electronic circuits comprise 3 input lines. With an output current of 8mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. In order to operate properly, its maximum power current (ICC) should be 0.04mA.
SN74AHCT373N Features
20-DIP (0.300, 7.62mm) package
74AHCT series
8 Bits
74AHCT373 family
20 pin count
20 pins
5V power supplies
SN74AHCT373N Applications
There are a lot of Texas Instruments SN74AHCT373N Latches applications.
- Shift left register
- Parallel data storage
- Digital bus buffer
- Automotive Body Electronics
- Multistage ripple counting
- A/D converters
- Lamp and Display (LED)
- Double bus register system
- Parallel Output
- Timers