SN74AHCT174N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHCT174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT174N Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. It is contained within the Tubepackage. Currently, the output is configured to use Non-Inverted. The trigger configured with it uses Positive Edge. Through Holeis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. The 74AHCTseries comprises this type of FPGA. You should not exceed 115MHzin its output frequency. A total of 1elements are present in it. There is a consumption of 4μAof quiescent energy. 16terminations have occurred. The 74AHCT174family includes it. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 2pF farads. Devices in the AHCT/VHCT/VTfamily are electronic devices. Through Hole mounts this electronic component. As you can see from the design, it has pins with 16. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Its flexibility is enhanced by 7 circuits. It operates from 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. It has 3lines.
SN74AHCT174N Features
Tube package
74AHCT series
16 pins
5V power supplies
SN74AHCT174N Applications
There are a lot of Texas Instruments SN74AHCT174N Flip Flops applications.
- Frequency Divider circuits
- Buffer registers
- Shift registers
- Functionally equivalent to the MC10/100EL29
- Digital electronics systems
- Cold spare funcion
- Set-reset capability
- Automotive
- Counters
- Dynamic threshold performance