SN74AHCT16374DLR
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 11.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT16374DLR Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. As part of the package Cut Tape (CT), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74AHCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 130MHz. D latch consists of 2 elements. T flip flop consumes 4μA quiescent energy. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74AHCT16374family includes it. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 2.5pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCT/VTfamily of devices. There is an electronic part mounted in the way of Surface Mount. There are 48pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 16bits in this flip flop. This D flip flop is well suited for TR based on its reliable performance. An electrical current of 5V volts is applied to it. The D flip flop is embedded with 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74AHCT16374DLR Features
Cut Tape (CT) package
74AHCT series
48 pins
16 Bits
5V power supplies
SN74AHCT16374DLR Applications
There are a lot of Texas Instruments SN74AHCT16374DLR Flip Flops applications.
- Memory
- Communications
- Guaranteed simultaneous switching noise level
- Load Control
- ESD protection
- Differential Individual
- 2 – Bit synchronous counter
- Automotive
- Supports Live Insertion
- Modulo – n – counter