SN74AHC74DRE4
| Parameters | |
|---|---|
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC74 |
SN74AHC74DRE4 Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Differentialas the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A 2V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~125°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74AHC series. A frequency of 115MHzshould not be exceeded by its output. Despite external influences, it consumes 2μAof quiescent current. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74AHC74 family. Power is provided by a 3.3V supply. JK flip flop input capacitance is 2pF farads. In this case, the D flip flop belongs to the AHC/VHC/H/U/Vfamily. Surface Mount mounts this electronic component. There are 14pins on it. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latch. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 2 circuits are used. This D flip flop is well suited for TR based on its reliable performance. As a result of its output current of 8mA, it is very flexible in terms of design. It has 4lines.
SN74AHC74DRE4 Features
Tape & Reel (TR) package
74AHC series
14 pins
SN74AHC74DRE4 Applications
There are a lot of Texas Instruments SN74AHC74DRE4 Flip Flops applications.
- Data storage
- Latch
- ESD protection
- Supports Live Insertion
- Clock pulse
- Safety Clamp
- Load Control
- Power down protection
- Set-reset capability
- Latch-up performance