SN74AHC595PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 20 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC595PWRE4 Overview
TSSOP package contains the device. 16 is the number of terminations on the chip. This item is packed in case Tape and Reel. Voltage rating of the part is 3.3V. 1 elements make up this part. It is equipped with a pin count of 16. The recommended mounting method is Surface Mount. Electronic components fall under the category of AHC/VHC/H/U/V. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A total of 8 bits are present on an IC chip. There are a total of 16 pins on it. Temperatures below 85°C are recommended for use. This device should not be operated below -40°C. A voltage of 5.5V is used to supply this voltage. It is necessary to use a voltage that is higher than 2V to provide this supply. A total of 9 output lines need to be operated.
SN74AHC595PWRE4 Features
With 16 pins
With 9 output lines
SN74AHC595PWRE4 Applications
There are a lot of Texas Instruments SN74AHC595PWRE4 Shift Registers applications.
- ROM Chips
- data transfer
- Sequence generator
- data manipulation
- Serial to parallel converter
- LED matrix control
- 7-segment display control
- Dual-rank shift, hold, and bus applications
- Generate time delay toward digital circuits
- Remote control holding register